User’s Manual
30
Network & Notification Setup
In the Main screen, use the Left or Right arrow buttons to display the Network menu.
Figure 41 — Network menu.
Network Screen
Highlight
Network
in the Network menu and press the button. The
Network
setup screen
displays. You will be able to change the Network, LAN, Modem, DVRNS and WebGuard
settings.
Figure 42 — Network setup screen.
Highlight the first box beside
Transfer Speed
. Press the
Up
and
Down
arrow buttons to set
the Transfer Speed from 50Kbps to 100Mbps.
Highlight the second box beside
Transfer Speed
. You can select the unit of measure for the
transfer speed between:
bps
and
ips
. Press the button to set the transfer speed.
Highlight the box beside
Quality
and press the button. You can select the Quality from:
Very High
,
High
,
Standard
and
Low
. Press the button to set the Quality.
NOTE: The higher Quality settings require higher Transfer Speed settings.
The transfer
speed you set is the maximum speed. Depending on the network environment, this
speed may not be achieved.
NOTE: The local recording speed might be affected by various network bandwidth
(Transfer Speed) conditions.
Summary of Contents for PDR-9LX
Page 1: ......
Page 2: ......
Page 12: ...User s Manual x...
Page 86: ...User s Manual 74...
