Digital Video Recorder
39
Highlight
LAN
and press the button to toggle between On and Off. When LAN is turned On
you can change the IP addresses.
Highlight the
IP Address
box that you want to change and press the button. Enter the IP
address of the computer you want contacted during an event. You can enter up to five IP
addresses.
Highlight the box beside
Retry
and enter the number of times you would like the DVR to try
contacting the computer. You can select from 1 to 10 retries.
If the modem was enabled in the Network screen, you can set up the DVR to contact a computer
running RAS. Highlight
Modem
and press the button to toggle between On and Off. When
Modem is turned On you can enter a telephone number.
Highlight the box beside
Remote Server Phone Number
and enter the telephone number of
the computer running RAS.
Highlight the box beside
Outside Line Call
and enter any numbers that must be dialed for an
outside line for your telephone system; for example, “9”.
Highlight the box beside
Callback Phone Number
and enter the telephone number of the
DVR.
You can save your Notification changes by highlighting
Save
and pressing the button.
Selecting
Cancel
exits the screen without saving the changes.
Configuring Devices
You can configure the video, audio, alarm, display and remote control devices connected to the
DVR.
Figure 53 — Device menu.
Summary of Contents for PDR-9LX
Page 1: ......
Page 2: ......
Page 12: ...User s Manual x...
Page 86: ...User s Manual 74...
