User’s Manual
58
You can save your Alarm-In changes by highlighting
Save
and pressing the button.
Selecting
Cancel
exits the screen without saving the changes.
Motion Detection Screen
Highlight
Motion Detection
in the Event menu and press the button. The Motion Detection
setup screen appears.
Figure 77 — Motion Detection Settings screen.
Your DVR has built-in video motion detection. Video motion detection can be turned On or Off
for each camera.
Highlighting the box under the
Sensitivity
heading and pressing the button allows you to
adjust the DVR’s sensitivity to motion for Daytime and Nighttime independently. There are
five settings with
1
being the least sensitive and
5
being the most sensitive.
Figure 78 — Motion Detection Sensitivity screen.
You can adjust the minimum number of detection blocks that must be activated to trigger a
motion alarm. Highlighting the box under the
Min. Blocks
heading and pressing the button
allow you to adjust the minimum number of detection blocks for Daytime and Nighttime
independently. Smaller numbers provide greater sensitivity because fewer detection blocks
must be activated.
Summary of Contents for PDR-9LX
Page 1: ......
Page 2: ......
Page 12: ...User s Manual x...
Page 86: ...User s Manual 74...
