User’s Manual
60
Figure 81 — Motion Detection Zone menu.
Select
— Activates highlighted blocks to detect motion.
Clear
— Deactivates highlighted blocks so that they will not detect motion.
Reverse
— Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All
— Activates all blocks to detect motion.
Clear All
— Deactivates all blocks so that they will not detect motion.
Reverse All
— Activates inactive blocks and deactivates active blocks.
OK
— Accepts changes and closes Zone setup.
Cancel
— Exits Zone setup without saving changes.
You can control excessive event logging and remote notification of motions detected after the
motion dwell time by adjusting the motion ignoring dwell intervals. Highlight the box beside
Motion Ignoring Interval
and press the button. A list of intervals ranging from 1 to 10
seconds or
Never
appears. The DVR will not log and notify motion events occurred during the
preset interval range.
NOTE: The record action for motion events will not be affected by the Motion Ignoring
function.
Highlighting the box beside
Daytime Setup
and pressing the button allow you to set up the
Daytime range.
Figure 82 — Daytime Setup screen.
Highlight the box beside
Daytime
and press the button. Use the Up and Down arrow
buttons to set the Daytime range. The DVR will consider the remaining time range as the
Nighttime.
Highlight the
Actions 1
and
Actions 2
tabs and the Motion Detection Actions 1 and Actions 2
screens display.
Summary of Contents for PDR-9LX
Page 1: ......
Page 2: ......
Page 12: ...User s Manual x...
Page 86: ...User s Manual 74...