User’s Manual
68
Highlight the box under the
Alarm-Out
and press the button. A list of Alarm Outputs
appears. You can associate as many Alarm-Outs with the Text Input as you wish. When the
DVR detects text input, it triggers output signals on all the associated Alarm-Out connectors.
You can also have the DVR’s internal buzzer sound if text input is detected.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the box under the
Notify
and press the button. You can toggle the entire list On
and Off by highlighting
Notification
and pressing the button. You can toggle the individual
items On and Off by highlighting that item and pressing the button. Highlight
OK
and press
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the
Notification setup screen and the DVR should be registered in the RAS (Remote
Administration System).
Figure 91 — Text-In Actions 2 screen.
Highlight the desired box under the
PTZ
heading, and press the button. A list of PTZ presets
appear. Select the preset positions for each PTZ camera, where you want PTZ cameras to move
to when the DVR detects text input.
Highlight the box under the
Spot Monitor
and press the button. A list of SPOT monitors
and cameras appears. Each SPOT monitor can be associated with a camera. The DVR will
display the associated camera on the SPOT monitor whenever it detects an input on the selected
text-in device.
You can save your Text-In changes by highlighting
Save
and pressing the button. Selecting
Cancel
exits the screen without saving the changes.
Summary of Contents for PDR-9LX
Page 1: ......
Page 2: ......
Page 12: ...User s Manual x...
Page 86: ...User s Manual 74...
