Digital Video Recorder
13
NOTE:
When selecting the
Network remote control
for the user’s authorization, you can control the DVR
remotely via network connections. Refer to the
Setting Up the Authority
section for details.
22.
Move to
HDD usage
, and select either
Once
or
Recycle
. When
Once
is selected, the DVR stops recording
when the hard disk drive is full. When
Recycle
is selected, the DVR continues recording when the hard disk
drive is full by overwriting the oldest video.
23.
Click the
Set up Time Sync…
button, and set up the time synchronization if required. See
Appendix 6 –
Time
Synchronization
for details.
24.
Click the
Change Signal…
button, and select the video input signal to each camera number (
Camera
1
to
Camera 32
) from a drop-down list (
Input Signal 1
to
Input Signal 16
for the camera numbers 1 to 16, and
Input
Signal 17
to
Input Signal 32
for the camera numbers 17 to 32).
25.
Click the
Note…
button, and set up the note function. The user can add or delete notes. If you want to read the
note, select the line and click the
View
button. Click the
Load
button to load the saved note, the
Save
button to
save the current note, and the
Text Save
button to save the current note to the text file.
26.
Click the
Set up backup...
button, and set up backup information. See the
SmartBackup
section.
27.
Click the
Set up pager...
button, and set up pager information. See the
SmartPager
section.
NOTE:
The
Set up pager...
button will be activated if you set up SmartPager to start in the SmartGuard setup.
28.
Click the
Set up Web Server...
button, and set up an IIS (Internet Information Services) for the WebGuard
program.
29.
Click the
Load...
button if you want to load typical settings. Click the
Save...
button if you want to save settings.
Click the
Default
button if you want to load default settings. You can save your changes by clicking the
OK
button. Selecting
Cancel
exits the dialog box without saving the changes.
NOTE:
Only the administrator level user can use the Load, Save and Default buttons.
