Digital Video Recorder
17
16.
Move to
Work hour
and set the start time (
From
) and end time (
To
) of working hours by holding down and
dragging the pointer.
NOTE:
Work hour
set in this menu is applied to the normal camera setup established in steps 10 to 12, and all
hours except the Work hours will be
After hour
.
17.
Move to
After hour
, and check the box if you want to set up different recording option during the hours outside
hours established in Work hour. Then, set the
Time-lapse rec. speed
,
Rec. image resolution
and
Rec. image
quality
by holding down and dragging the pointer. Refer to the steps 10 to 12 for the available values for each
setting.
18.
Click
Set Privacy Area
to set up the privacy area on the image. The selected area set as Privacy Area will NOT
be displayed either in the live mode or playback mode. The DVR will display the selected areas in black, and also
does NOT react to events detected within the area set as Privacy Area. Move to
Apply
and check box and then set
the privacy area zone.
19.
The setup screen is made up of a 40x30 grid. First, click the
Draw
radio button and select a tool to use from the
drop-down list, and then set up the privacy area on the image. Use the tools as follows:
Point
—
Place the cursor on the image and click the left mouse button. A single box appears where the cursor is.
Line
—
This tool can be used to draw irregular shapes. Place the cursor where you want to start the line. Hold
down the left mouse button and drag the cursor to where you want the end of the line. Release the mouse button
and a group of boxes appears along the line you drew. You can draw lines around shapes by repeating this
process.
Rectangle
—
Hold down the left mouse button and drag the cursor in any direction. A rectangle appears. Once
the rectangle is the size you want, release the mouse button and the rectangle fills with boxes.
Fill
—
When using the fill tool, clicking the mouse will fill that area of the image with boxes. If a shape has been
drawn with the line tool, clicking inside will fill the area with boxes. Clicking outside the area will fill the outer
area with boxes. If no shapes have been drawn, the entire screen will fill with boxes.
NOTE:
When you select the
Erase
, you can use the tools as described above to delete boxes.
20.
Click
Advanced Setup...
to select an advanced camera setup. You can set up the pre-event recording and event
recording options for each event.
