User’s Manual
30
NOTE:
The recording speed might decrease when the image files from multiple cameras are saved at the same
time.
7.
Move to
Case Sensitive
, and check the box to distinguish between capital letters and small letters from text-in
data.
8.
Move to
Transaction Start
, and enter the character string to be considered as transaction start. If the
Any
character
box is checked, preset any character will be considered as transaction start.
9.
Move to
Transaction End
, and enter the character string to be considered as transaction end.
NOTE:
Entering multiple keywords for
Transaction Start / End
are supported. Use a semi-colon (;) to delimit
each keyword. When the semi-colon is included in
Transaction Start / End
itself, use a double semi-colon (;;).
10.
Move to
More Lines
, and set the line count after preset character string for transaction end. The DVR will
include preset line count in one transaction.
11.
Move to
Line Delimiter
, and enter the character string that divides each text-in line.
12.
Move to
Ignore String
, and enter the character string. The DVR will ignore the text-in line including the string
which is set in this field.
13.
Move to
Display Dwell
, and set the dwell time to display the text-in information by holding down and dragging
the pointer.
14.
Move to
Transaction Timeout
, and set the duration to wait for a new text input. The DVR will consider the
transaction is ended if there is no text input during preset timeout after the last text input.
15.
Move to
Camera association
, and click the camera icon to be associated with a selected text-in device. Multiple
cameras can be selected. The text-in information will be displayed on the screen when the associated camera is
displayed in the single-screen mode.
Setting Up the Remote Access
