User’s Manual
34
2.
Click the text field beside
User ID
, and enter the user ID using either the actual keyboard or the virtual keyboard.
3.
Move to
Authority level,
and select the authority level from a drop-down list:
User Group (1-3)
,
Manager
, or
Administrator
.
NOTE:
Only the administrator level user can edit the user’s information and their authority setup.
NOTE:
The authority setup of the Administrator cannot be edited.
4.
Click the
Change...
button beside
Password
, and the
Change password
dialog box appears. Set up the
password for a newly registered user.
5.
Click the text field beside
New password
and
Confirm new password
, and enter the password using either the
actual keyboard or the virtual keyboard. The
Old password
may not be used when entering a password for a
newly registered user. After you have set up the password, you can save your settings by clicking the
OK
button.
Selecting
Cancel
exits the dialog box without saving the changes.
NOTE:
Up to eight characters may be used for a password.
NOTE:
The password will not be saved when
New password
and
Confirm new password
do not match.
6.
After you have set up the user information, you can save your settings by clicking the
OK
button. Selecting
Cancel
exits the dialog box without saving the changes.
7.
Click the
Edit User
button to edit the established user information. If you want to delete the user, click the
Delete
User
button after selecting the user to delete in the list.
NOTE:
The password will not be changed when the
Old password
does not match, or the
New password
and
Confirm new password
do not match.
8.
Select a registered user in the list, and check the desirable option boxes to set the user’s authorization.
NOTE:
For the remote access from the BASE system, the
Remote Monitoring
option should be selected for the
user’s authorization. And, select the
Remote Search
if you want to review recorded video on the POST system,
and select the
Network Remote Control
if you want to control the DVR remotely via network connections using
the network keyboard or RAS mobile program..
9.
Click the
Available Camera
button if you want to assign the camera number individually to each user. Check the
box beside the camera number to enable the user to monitor and review that camera image. Clicking the
Enable
all
or
Disable all
button enables or disables all the cameras to the target user. Click the
Apply all user in same
level
button if you want to adjust the current authority settings to all users in the same authority level.
