User’s Manual
84
1.6 Click
Protocol
and click the
Add
... button.
1.7 Select
Microsoft
from the Manufacturers and
TCP/IP
for the Network Protocols. Click the
OK
button to save
the changes and return to the
Network
dialog box. In the
Network
dialog box, click
TCP/IP
in the list of
network components, and then click the
Properties
button below.
1.8 Under the
IP Address
tab, click the
Specify an IP address
radio button. Enter the IP address as
“10.10.10.10”
and the subnet mask as
“255.255.255.0”
in the text field beside
IP Address
and
Subnet Mask
. You can save
your changes by clicking the
OK
button. If you select
OK
, you might need to allow the system to reboot.
Selecting
Cancel
exits the dialog box without saving the changes.
1.9 Open My computer on the desktop, and select
Dial-Up Networking
. Then, click
Make New Connection
. If
Dial-Up Networking
is not listed, return to step 1.1.
1.10 Enter
“My Network”
for the name of the POST DVR you are dialing, and select an installed modem from the
drop-down list. Then, click the
Next
button.
