Digital Video Recorder
25
Archive
Highlight
Archive
and press the button, and the
Archive
setup screen appears.
Figure 17 : Record – Archive setup screen.
Highlight
Archive On
and press the button to toggle between On and Off.
NOTE: If you have not set up a storage device for archiving, a message appears notifying you of this.
Select the Days and Time Range you want archived.
You can accept the Archive Data Range by leaving the default checkmarks in the
Last Archived
and
Continue
boxes.
If you wish to enter specific times and dates in
From
and
To
, toggle the checkmarks Off and then enter the time and
date.
Highlight
Recycle
and press the button to toggle between On and Off. When Recycle is On and the storage device
is full, the newest archived video data will overwrite the oldest archived data. When Recycle is Off, the DVR will stop
archiving video data until more space is made available.
CAUTION: When the Recycle is On, changing the start date and time for archiving will delete all
archived data after the changed start date and time.
Highlight
Summary Archive
and press the
button to toggle between On and Off. When Summary Archive is On,
the DVR does not archive the entire recorded video, but instead archives 1 or 2 ips from each channel. This allows
the DVR to archive more video and increases archive speed too.
NOTE: The archiving speed might be slower than the recording speed when a large quantity of recorded data
is being archived. In this case, the oldest data can be overwritten by the latest data being recorded.
To prevent data you want to keep from being overwritten, use the Summary Archive function, or set the
recorded image quality to Standard during the archiving process.