Digital Video Recorder
23
NOTE: You will only be able to set up PTZ devices if the
PTZ port is set to RS232 or RS485.
Figure 26 — Camera PTZ setup screen.
Highlight the box in the
Product
column for the PTZ camera you wish to configure
and press the button. A list of PTZ devices appears. Select your camera from
the list and press the button. You will need to connect the camera to the RS232
or RS485 connector on the back of the DVR following the camera manufacturer’s
instructions.
You can assign IDs to each camera by highlighting the box under the
ID
heading and pressing the button. Change the
number by highlighting it and using the
Up
and
Down
arrow buttons to increase and decrease the number. The PTZ
ID number can be set from 0 to 256.
Highlight the
Setup…
box and press the button. The Port Setup window appears.
Configure the port’s setting based on the PTZ camera manufacturer’s instructions.
Audio
Highlight
Audio
in the Devices menu and press the button. The
Audio
setup screen appears.
The DVR can record up to four audio inputs. Highlight the
box beside the input and press the button. A list of cameras
appears, and you can select which camera you want associated
with that audio input.
Highlight
Enable Audio-Out
and press the button. This
toggles between enabling and disabling audio out.
Figure 27 — Audio setup screen.
Summary of Contents for PDRH-8-RT
Page 1: ......
Page 2: ......
Page 14: ...User s Manual 6...
Page 50: ...User s Manual 42...