PACOM PDRH-8-RT User Manual Download

Page: 62 / 78

User’s Manual

There are three view modes.  Standard view, Expanded view and Compact view.  Standard view (default) displays
combined recording information of all camera channels currently displayed on the screen. In the Standard view mode,
selecting the   icon located at the bottom switches to the Expanded view mode. The Expanded view displays the
recording information of each camera channel currently displayed on the screen. Selecting the   icon in the Standard
view mode switches to the Compact view mode which displays only the toolbar. Selecting the   icon in the Compact
view mode switches to the Standard view mode, and selecting the   icon in the Expanded view mode switches to the
Standard view mode.

Selecting or located at the bottom zooms the record table. Selecting displays eight hours (1-minute based),

and selecting displays 24 hours (3-minute based) at once. To move to earlier or later times that are not shown in the

current record table screen, select the arrows located at the end of the times by using the arrow buttons on the front panel.

NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording

status bar displays recording information in the following priority order: Panic



Pre-Event



Event



Time. The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event,
Purple for Event, and Blue for Time.

Selecting located at the bottom displays the Calendar Search screen. See the following Calendar Search section for

details.

Selecting located at the bottom displays the Search menu.



Go To:

Displays the first or last recorded image, or searches by date and time (see the previous

Searching Video – Go To

section of this chapter for more details).



Clip-Copy:

Clips a video segment and saves it (see the following

Clip Copy

section for more details).



Print:

Prints the current playback image.



Zoom:

Zooms the current playback image.



Slow Play:

Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).

The individual playback controls at the bottom perform the following functions as described below:

Go to the previous image

Play/Pause

Go to the next image

Fast backward play

Fast forward play

Selecting in the top-left corner exits the Record Table Search screen.

Calendar Search

Figure 71 — Calendar Search screen.

Days with recorded video display on the calendar with white
numbers. You can highlight the days with recorded video by
using the arrow buttons. Once you have highlighted a day,
press the (Play/Pause) button to select it.

A time bar displays at the bottom of the calendar. Hours in
which video was recorded will be highlighted with blue. You
can use the

and

Down

arrow buttons to highlight the time

bar. Once the time bar is highlighted, you can select the time
by using the

Left

and

Right

arrow buttons.

NOTE: The time bar is in one-hour segments. If a segment
is highlighted, it means that some video was recorded
during that hour. However, it does NOT mean video was
recorded for the entire hour.

If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it is possible for the DVR
to have more than one video stream in the same time range. Move to

Select a Segment

, and select the video stream you

want to search. Refer to the

Appendix – Time Overlap

for further information on searching time-overlapped video streams.

NOTE: The lower number of the Segment indicates the latest recorded video.

Once you have set the date and time you want to search, highlight

and press the button. The selected date and

time will display.