page 7
Paddle Palace A32W PRO Robot
User Manual
Setting the Ball Loop for Serve
The Robot can be set to serve the ball directly over the net or to bounce first
on the server’s side. A ball served directly over carries stronger spin and higher
speed. Turning the Loop Adjustment Knob clockwise will result in the shooting
pipe pointing higher, thus producing a ball that is served directly over the net.
By turning the Loop Adjustment Knob counterclockwise, the shooting pipe will
point downwards, producing a ball that bounces before going over the net.
These adjustments can be made while the Robot is running.
Ball
bounces
before
going
over the
net.
A
Ball is set
to serve
directly
over the
net.
A
Setting the Throw Wheel Speeds (Amount of Speed/Spin)
Wheel speed can be set in the working or standing mode. The top and
bottom wheel display will blink the current settings when the robot is
in the standby mode. The wheel speeds are changed by pressing the
increase or decrease buttons. The speed of the top and bottom throw
wheels determine the speed and amount of spin, or lack of spin of the ball
delivered. Each wheel has 10 numeric settings. The higher the setting the
faster the ball speed becomes. The ball speed is roughly proportional to the
strength of spin.
To produce
topspin
, the top wheel is set at a higher number than the
bottom wheel.
To produce
underspin
, the bottom wheel is set higher than the top.
Less or no spin
is produced when the wheel speeds are set closely
together.
START
Set
Top /
Bottom
Wheel
Speed
The ball frequency can be adjusted in the standby or working
mode. Press the frequency “+” button to increase or “-“ to decrease
frequency.
There are 10 possible settings. The slowest (1) produces around 30
balls per minute. The fastest setting (10) produces around 85 balls per
minute.
Setting the Frequency
Adjust
Frequency