page 8
Paddle Palace A32W PRO Robot
User Manual
How to Select Spin / Top Wheel and Bottom Wheel
Spin can be selected by adjusting both the speed of the Top Wheel and Bottom
Wheel and by rotating the motor head of the Robot. There are 9 different spins
to choose from:
O
Top Spin
O
Under Spin
O
No Spin [produced by varying the speed of top and bottom wheel]
O
Left Side Spin
O
Right Side Spin
O
Left Side Topspin
O
Left Side Underspin
O
Right Side Topspin
O
Right Side Underspin
Loop Modulation
When modulating the loop of the serve, loosen the Loop Lock
Knob with your left hand, while adjusting the Loop Modulation
Wheel with your right hand. When the desired setting is
achieved, lock the knob.
Loop Lock
Loop Modulation Wheel
Angle Modulation ( Angle of Serve)
Knob A and Angle Knob control the Robot’s angle of serve. Knob A
gives the option of either a fixed course or alternative course of serve.
Angle Knob controls the size of the angle or the range of width of the
serve.
There are 3 steps for setting the angle:
1. Turn Knob A and aim its red dot to a fixed point position.
2. Rotate the Angle Knob to the desired angle, using the indication
label.
3. Turn Knob A back to the alternative point position.
Knob A
Angle Knob
