page 7
Paddle Palace S4W Robot
User Manual
Setting the Head Angle (Loop)
Loosen the
Head Angle Lock
knob with one hand while
adjusting the head angle using the
Loop Adjustment Knob
.
Tighten the Head Angle Lock knob to hold head at desired
angle.
Set the head angle upward to deliver the ball directly.
Set the head angle downward and the ball will bounce on
the robot side of the table before crossing the net. Use this
setting to practice service returns, the speed and spin is
slightly reduced because of this extra bounce.
Head Angle
Lock
Loop
Adjustment
Knob
High curve makes landing spot long
Low curve makes landing spot short
Setting the Type of Spin (Head Rotation)
Each of the two shooting heads can be set to produce one of
9 different types of spin. Top Spin, Under Spin, and No Spin
are produced by varying the speed of the top and bottom
throw wheels. Left-side spin, right-side spin, left-side top
spin, left-side under spin, right-side top spin, and right-side
under spin are achieved by rotating the shooting heads.
When rotating a head, be sure it does not interfere with the
operation of the other head. Both heads cannot be set to
straight side spin at the same time.
Top and
Bottom
Throw
Wheels