15
Step 3: Using the calibration paper
1. Insert the calibration paper with the white side
DOWN
into the feed
slot.
2. Press
MENU
(
MENU
)
button to bring up the
System Menu
.
4. Select
OK
(
OK
)
to begin the calibration process.
Note:
The process will take few minutes to
fi
nish, and then shut down
automatically. Please turn the power back on again.
3. Align the feed slot cover. Assembly the edge’s two latching tabs with
the mounting holes on the scanner. Push the cover back in until it
clicks in place.
3. Press
LEFT
( )
/RIGHT
( )
button to select
Setup
(
) button then
press
UP
( )
/DOWN
( )
button to select “Calibration”.
