2
947178
FINAL POWER ADJUSTMENTS
Ensure that the speaker is set to its lowest setting
(this will prevent an excessively loud page when
first used). Conduct test page and increase vol-
ume as necessary with a screwdriver. Turn clock-
wise to increase the volume (see Table 1). Install
the plastic cover.
NOTE:
Due to high decibel output, it is not recom-
mended to test paging while working closely with
the horn speaker.
TECHNICAL ASSISTANCE
When calling, have a VOM and a telephone test
set available and call from the job site. Call (540)
427-3900 and ask for PagePac Technical Sup-
port, or call (540) 427-6000 for Valcom 24-hour
Automated Support or visit our websites at
http://www.pagepac.com and www.valcom.com.
Should repairs be necessary, attach a tag to the
unit clearly stating company name, address,
phone number, contact person, and the nature of
the problem. Send the unit to:
Valcom, Inc.
PagePac
®
Repair Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
FIGURE 1
Table 1: SWITCH SETTINGS
SWITCH
SETTINGS
70V
WATTS
25V
WATTS
1
1.80
DO NOT USE
2
3.70
DO NOT USE
3
7.50
0.9
4
15.0
1.80
5
30.0
3.70
6
DO NOT USE
7.5
7
DO NOT USE
15.0
10-FOOT CHAIN
ATTACHMENT RING
SPEAKER CABLE
VOLUME LEVEL
CONTROL
ERMINALS
(DO NOT FORCE
PAST #7)
