www.pagergenius.com
User manual
5
T9050/P2000
RESETTING A PAGER TO THE TRANSMITTER
When you order more pagers, you will need to add the pagers to the
transmitter. Below are the following steps to add a pager to your system:
Step 1:
Turn the pager around, and press the
Learn button
, the middle
button on the rear of the pager. The digital display of the pager will read
[----]
.
Step 2:
Press the number you would like the pager to display, followed by the
enter button. The pager will start alerting, and the pager number will have
changed to the number entered.
The pager will always display this number unless the settings are changed
manually by the end-user.
1 2 3 4
5 6 7 8
9 0 – +
Clear
Call
Step 1:
Press the
Learn button
to reset the Pager
Step 2:
Use
Number Keys
to
input a number for
the selected Pager
Step 3:
Press the
Call button
to confirm and save
the number
