4
Installing the Transmitter
INSTALLATION
1.- EQUIPMENT SETUP
(1) Wireless Call buttons
Unwrap all sending unit (Wireless Call button)components. Plug the power supply with the
large tip into a standard outlet and plug it into the “Charger Base” for Call button transmitters.
Stack the Call Buttons on the charger base. The red indicator will turn on to indicate the
call buttons are charging properly. We recommend some type of surge protector on the
power supply for protection. Power surges are not covered under system warranty.
(2) Alpha TXT Pagers
Locate the charger base for the pagers, place it in a sturdy out of way area. Connect the
charger base to the power with the provided power supply.
Insert the pagers on the charger base. The pager number will always face up and the
red charging light indicator will turn on to indicated pager is charging properly. You should
check for charging indicator to appear on each pager. On the top of each pager is your
pager number.
