7
5) If the message is stored you can usually clear the message out of the pager by going to
the call button it received the page from and pressing “Cancel”. This helps the user keep
track of the tasks may or may not need attention.
6) To clear all the messages from the pager the master erase is activated by placing the
pager on the charging station for 5 seconds. This will clear out and saved messages on
the pager.
Note:
If your system has a cancel button the pager will not receive a cancel page unless
it has received and stored another message from the same call button. In other words it
can only receive a cancel message if it has received a previous message from the same call
button.
Wireless Call Button:
There are several version of the call button 1,3, and 5 buttons.\
The call button should have a label with a message for each number. This will let the user
know which button they will need to press.
Ex:
1- Tech
2- Manager
3- Service
4- Temperature
5- Cancel
This indicates that if the user presses 2 the corresponding pager will show
“Manager” to let them know a manager is needed.
The messages are customized for each one of our clients. The screen will display 12
characters and if the message is longer than then the screen will scroll to show the rest of
the message.
