Note:
Put all the pagers on the charger and disconnect the power supply going to the
charger. Connect the charger back to the wall outlet. You will have three (3) minutes to
program the Set Alert Mode.
With this feature you can have the option of changing your pagers alert type.
To change the alert type of your pagers follow the below instructions:
1.
At the “Set Alert mode” menu press the
“ENTER”
key
Select one of 1~6 Alert modes then press
“SEND”
key.
1.
LED
2.
LED / Vibe
3.
LED / Beep
4.
LED / Vibe / Beep
5.
Vibe
6.
Beep
Use the
“▲”“▼”
key to scroll through these 6 alert modes.
Pagers that have successfully received the change alert mode message will blink all
LED lights. At this point, all of the pagers in your system should alert with the alert mode
that you selected.
Press
“C”
key to exit, and return to the main menu.
SET ALERT TIME
Note:
Put all the pagers on the charger and disconnect the power supply going to the
charger. Connect the charger back to the wall outlet. You will have three (3) minutes to
program the Set Alert Time.
With this feature, you can set the alert time how long the pager alerts when the pager
receives the signal from the transmitter.
