Pain Relief Essentials Rhythm Touch, Instruction Manual

Acu-Roller Instructions  

Connect the Acu Roller by inserting the thick metal plug of 
the lead wire cable into the top end of the unit (slot 1).  Plug 
1 lead wire (the thin metal plug) into the bottom of the 
handle of the roller.  Plug the other thin metal plug into one 
of your gel pads.  Apply the pad anywhere on your body.  
Apply gel or lotion (we like Spectra

®

 360 Electrode Gel or 

Aloe Vera gel) to your skin where you wish to use the Acu Roller.  Set Mode to 1.  
Start off with the strength at 0 and increase to your comfort.  Remember that both the 
pad and roller need to be on your body to work.  

 Acu-Pen Instructions  

Connect the Acu Pen by inserting the thick metal plug of 
the lead wire cable into the top end of the unit (slot 1).  
Apply gel or lotion (we like Spectra

®

 360 Electrode Gel or 

Aloe Vera gel) to your skin.  Set Mode to 1.  Switch the unit 
on and press the metal top of the pen on the desired area and 
choose motion key.  Start at 0 strength and work your way 
up until you feel sensation.  You can only feel this on certain pressure points (neck, 
fingers, ear…).  Some will feel the effects more than others. (Note: plug in and place 
a pad in a location near where you are going to use the pen to create a ground.)  
 
Please see hand and foot charts on the inside front cover. 

 Acu-Flex Pad Instructions  

(formerly Acu_Mouse / Facial Pad)

Connect the Acu Flex pad by inserting the thick metal plug 
of the lead wire cable into the top end of the unit (slot 1).  
Plug both lead wires (the thin metal plugs) into the 2 holes 
located on the side of the Acu Flex pad.  Apply lotion or gel 
(we like Spectra

®

 360 Electrode Gel or Aloe Vera gel) to 

the application point on your skin and press the Acu Flex 
pad against your skin and choose the motion key.