Page 6
Prepared for – all rights reserved. 2017a
Product Description
The Rhythm Touch is a
low-frequency
electrical muscle stimulator and massager that
offers the highest quality and performance, is easy to use, has no side effects, offers a
fully automatic computerized control system.
Product Specification – Rhythm Touch Standard Unit
A: Massager Main Unit (1 pcs)
Figure 1 Rhythm Touch Q 2-Way Massager
B: Adhesive Gel Pads (4 pcs)
C: Protective Holder for Pads (2 ea.)
D: Lead Wire Cords (2 ea.)
E: Batteries: DC 1.5V x 2 (AAA size)
Set Up the Rhythm Touch For Use
Set Up Procedures
a.
Take out the equipment from the case.
b.
Start by setting the output level (Strength) on “0” or “off”.
c.
Set the conversion switch to I or II, according to the number of leads used.
(Set to “I” mode for 1 lead with 2 pads, set to “II” mode for 2 leads with 4 pads)
d.
Insert a lead wire cord into the correct plug socket of the massager.
e.
Insert the opposite ends of the lead wire cord into each adhesive gel pad socket.
f.
Take the adhesive gel pads off the protective holder.
g.
Place the gel pads at desired areas of the body.
h.
Turn “on” the unit by turning the Power-on/off level dial.
i.
Select desired massage type key
j.
Select desired strength level.
k.
The Unit will shut off automatically after 15 minutes. Repeat if desired.