14
Step 18: To replace a switch with
the Momentary On Switch,
remove the power, output, and
ground wires from the switch
you are replacing. Then, locate
the tabs located at the top and
bottom of the switch.
Step 19: These tabs lock the switch in place. To remove the switch,
squeeze the tabs in and slide it out of the bracket.
Step 20: Insert the Momentary On Switch into the empty socket of the
bracket. Then, connect the ground and output wires. The red
wire will not be needed and can be stowed out of the way.
Summary of Contents for Track Rocker series
Page 2: ......
Page 22: ...18...
Page 24: ...Painless Performance Products LLC 2501 Ludelle Street Fort Worth TX 76105 Phone 817 244 6212...