background image

Section 350-231-172

Revision 01

16

HLU-231 List 7B

Specifications

Maximum Power Consumption

16 Watts (without Doubler);  35Watts (with Doubler)

Maximum Heat Dissipation

7 Watts (without Doubler);  12.5 Watts (with Doubler)

Mounting

AT&T 220-configuration or equivalent.

Dimensions

Height:

5.9” (15 cm)

Width:

1.4” (3.5 cm)

Depth:

10” (25.4 cm)

Weight:

1 lb. 14 oz.

Documentation

The HLU-231, List 7B  has a complete technical practice that you can down-
load from the PairGain Technical Manuals Web page at: www.pairgain.com
A password is required. If you do not have a password, contact your PairGain 
sales representative.

If you have any comments on any PairGain documentation, send mail to 
technical_publications@pairgain.com.  Type the product name and the sec-
tion number of the document in the subject area of the email message.

Technical Support

PairGain Technical Assistance is available 24-hours-a-day, 7-days-a-week by 
contacting PairGain Customer Service Engineering group at: 

Telephone:  (800) 638-0031 or (714) 832-9922 

Fax:  (714) 832-9924

During normal business hours (8:00 AM to 5:00 PM, Pacific Time, Monday 
- Friday, excluding holidays), technical assistance calls are normally 
answered directly by a Customer Service Engineer.  At other times, a request 
for technical assistance is handled by an on-duty Customer Service Engineer 
through a callback process.  This process normally results in a callback within 
30 minutes of initiating the request.

Summary of Contents for 150-1111-72





















Reviews: