150-450-105-02, Revision 02
Installation
HRE-450 List 5
November 4, 1998
5
I
NSTALLATION
This section describes the tools and procedures for installing the HRE-450.
I
NSTALLATION
K
IT
The HRE-450 installation kit components are listed in Table 2. If any of the above items are missing, or the
shipment is damaged, please contatct your PairGain sales representative.
L
OCATING
THE
N
ECESSARY
T
OOLS
To install the HRE-450, you need the following tools:
•
blade screwdriver
•
drill
•
wood/metal or concrete drill bit, depending on installation surface
•
hammer
•
Type 216C (7/16 in.) wrench
Table 2.
Installation Kit
Quantity
Description
1
HiGain Remote Enclosure (HRE) 500 Technical Practice, Section 150-450-100
2
three wood screws (#10 x 1.5 inch)
1
three anchor nuts (#10 x 1 inch)
2
three flat washers (#10 CPS/ZPS)
2
one cable tie (5.5 inch length, 0.15 inch width)