150-402-102-01, Revision 01
Using the Maintenance Terminal
HRU-402 List 2
July 27, 1998
27
Set Clock
This option is available during Local Login only (see
Figure 7
).
1
From the Local Login screen, press
to display the Set Clock screen.
Figure 13.
Set Clock Screen
2
At the Time prompt, enter the time (in 24-hour format) by pressing the
key. The cursor defaults to the New Time field. Setting the
seconds is optional.
3
At the Date prompt, enter the date (mm/dd/yy) by pressing the
key. The cursor defaults to the New Date field.
4
Type
to exit the Set Clock menu. The system date and time is updated
and the Remote Terminal Main Menu is displayed.
If you input an invalid entry, the following messages display
followed by the name of field where the invalid entry
occurred:
> error
The Set Date option sets the date at the HRU unit only. All
other units have this option set by the HLU.
SET
CLOCK
TIME: 00:14:33
DATE: 02/02/98
CIRCUIT ID#:
Format: HH:MM
MM/DD/YY
NEW TIME:
NEW DATE:
