Installation
150-204-111-01, Revision 01
6
April 7, 2000
HRE-204 List 1A and List 2A
Mounting the HRE-204 on a Wall
1
Loosen the 216 HEX security nut on the side panel (
) with a
7
/
16
-inch CAN wrench.
Figure 4.
Side Panel Assembly
2
Remove the side panel.
3
Remove the top retaining screw that holds the backplate to the chassis.
4
Grip the top of the rear panel, which is held in place with friction latching clasps, and unlatch it from the
enclosure.
