MOTORCYCLE Finder by PAJ with ONLINE localization
V.1.0 EN © PAJ UG (haftungsbeschränkt)
7
3.1
Installation
Please proceed as follows when connecting
the Finder to your car battery. The following
figure (page 9) serves as a guide.
1.
Connect the MOTORCYCLE Finder to
the cable harness using the black
plug-in function.
2.
Connect the device to the battery.
Connect
the red cable with the fuse to
(+).
Connect the black cable to Minus
(-). Attention! The poles must never be
reversed.
Note: When connected to the power supply,
the MOTORCYCLE Finder switches on
immediately and the LED lights emit a
signal.