PAJ POWER FINDER 4G, Manual

1.4 Connection to vehicle

Please note the following points, before connecting to the vehicle:

• SIM card already placed in the USB GPS Finder 

•  The USB GPS Finder must only be connected to the designated 12V socket 

in your vehicle

• No other parts of your vehicle should be damaged by the attachment

 On most newer vehicles, the power supply to the 12V socket is interrupted 

as soon as the vehicle has been switched off. This means that the FINDER 
is no longer supplied with power and switches off after approx. 30 minutes. 
However, on some vehicle models, it is possible for the vehicle battery to be 
discharged while the vehicle is stopped in order to supply power to the USB 
GPS Finder. However, if you regularly drive your vehicle, this should not be a 
problem if the battery is intact, as it will always be sufficiently recharged by 
driving. If this is not the case, please check whether your battery has dischar-
ge protection before connecting it and upgrade it if necessary. The FINDER 
requires approx. 10-20 mAh in standby mode

NOTE!

Please always observe the manufacturer‘s specifications for your 
vehicle. Claims for damages for improper connections are excluded.

1.5 Installation

Search the 12V socket in your 
vehicle.

1.

2.

Plug the FINDER into the 12V 
socket.

•

3.

The LEDs light up, when the 
device is connected correctly.