POWER Finder by PAJ with Online-Tracking V.1.1 EN
© PAJ UG (haftungsbeschränkt)
16
protective rubber to the right. Subsequently, the LED
lights are activated. As soon as you have got a GPS
reception, the blue LED flashes.
Recommended first step: To receive the best GPS
signal place the POWER Finder outside and make
sure it is not covered. Avoid garages, basements
and similar.
2.6
Use
Once the activation, switching on and the transfer of
a first database has been successful, you can place
the FINDER in a location of your choice and take a
look at the FINDER´s location by using a smartphone,
tablet or PC. Use our app or go to the following
website:
The FINDER-portal will introduce you to its
functions step by step.
2.7
Meaning LED lights
Green LED - GPRS status
S
IGNAL
M
EANING
The green LED is off
Standby mode
The green LED flashes
every 2-3 seconds
GPRS module available
Blue LED - GPS status
S
IGNAL
M
EANING
The blue LED flashes
every 2-3 seconds
GPS module available
The blue LED is off
Standby mode
The GPS tracker will go
into standby mode after
not being moved for a
while. You can activate the
tracker by either moving it
or calling the device. The
GPS Tracker will
automatically switch back
on.
The blue LED lights
constantly up
No signal available.
GPS tracker is searching
for a signal.
Summary of Contents for POWER FINDER
Page 1: ...POWER FINDER...
Page 63: ......
Page 64: ...PAJ UG haftungsbeschr nkt Am Wieschen 1 51570 Windeck Germany...