23
5.
Check the box for
User Group
, select
PPTP VPN
, and hit
Create
.
You have now created a new user and added it to the PPTP VPN group. This gives the user access to the
PPTP VPN on the router.
CHANGE VPN SUBNET
When you connect to the router remotely via PPTP VPN, you will be given an IP address from
10.0.191.110 to 10.0.191.210 by default. If you would like to change the PPTP VPN subnet, please take
the following steps.
1.
Navigate to
System->Dashboard->Status
and click on the CLI widget.
2.
The following commands are used to change the PPTP VPN subnet:
config vpn pptp
set sip
starting IP
set eip
ending IP
end
The following example shows the commands to change the VPN IP range from 192.168.1.20 to
192.168.1.25.