Pakedge Device & Software P8 Quick Start Quide Download

Page: 1 / 3

pakedge

device&software

inc.

P8 -

Boot Sequence Power Distribution Unit with Remote Power Cycling

Quick Start-

version 1.0

Quick Installation

Power on the P8 and connect it to the Local Area Network (LAN) via the 10/100 Base-T Ethernet

port.

By default, the P8 will begin to power on the outlets beginning with the “Modem” outlet. After 60

seconds, it will power on the “Router” outlet and then continue to power on the remaining outlets.

To access the P8’s web interface, make sure that your computer’s IP address is on the same

subnet as the P8, open up a web browser and enter

192.168.1.210

(P8’s default IP address) in

the address bar.

Summary of Contents for P8

Page 1: ...00 Base T Ethernet port 2 By default the P8 will begin to power on the outlets beginning with the Modem outlet After 60 seconds it will power on the Router outlet and then continue to power on the rem...

Page 2: ...he P8 gives users the option to reboot equipment and turn on off specific outlets on the device 3 Monitoring AC power consumptions The P8 has the option to send warning messages when the aggregated AC...

Page 3: ...manual for further instructions on how to use the P8 Model No P8 Input 100V 120V Output 100V 120V MAX 15A Packing List Power Distribution Unit x1 Rack mount brackets x2 Quick Start Guide x1 Power Cord...