RSB-KIT INSTALLATION MANUAL
18
The basic setup is a network broken into 4 virtual local area networks (VLANs) with priority ranging from
higher to lower from VLAN 2 to 5. Most installations will only require plugging in the cables into the right
ports and setting up the type of internet connection (ie. Static, Dynamic, etc) for an easy plug and play
configuration.
As mentioned before, with the default Pakedge configuration, all devices can see each other when
addressing their IP address, even if on a different VLAN. However, broadcasts are limited to the VLAN the
device is on.
To complete the basic setup- Follow the instructions in:
1. Section 3 to complete the hardware installation
2. Then Section 4 to configure the broadband internet connection.
3. At this point, you are up and running, however if you desire to activate the optional Security Subscription,
go to Section 5.
2.2.2 Basic Setup
Summary of Contents for RSB-KIT
Page 1: ...RSB KIT Preconfigured Audio Video Bridging System Installation Manual Version 2 0...
Page 50: ......
Page 51: ......