RSB-KIT INSTALLATION MANUAL
33
4.3 PPPoE Configuration
To configure the Router to use a PPPoE connection you will need to complete the following steps:
1) Determine the following information provided by the Internet Service Provider:
- PPPoE Username
- PPPoE Password
2) Connect an Ethernet cable from the SW8-GBV and to a PC computer.
3) Open Internet Explorer on the PC and go to http://192.168.1.99.
4) At the login prompt type in the username:
user
and the password:
user.
Summary of Contents for RSB-KIT
Page 1: ...RSB KIT Preconfigured Audio Video Bridging System Installation Manual Version 2 0...
Page 50: ......
Page 51: ......