6
S8Mpdp Quick Start Guide
Preparing to Install the Switch
Tools Required:
PC or Laptop with Ethernet Interface (an integrated DB-9 port or USB to Serial adapter may be
necessary if you would like to use the console interface)
Ethernet Cable (RJ45 Cable)
Phillips Screwdriver (if using Rack-mount Brackets)
Installation
1.
Open Box and Remove Unit.
a.
OPTIONAL: If mounting the switch in a standard 19” AV rack, attach the rack mounting
brackets, included with the S8Mpd, to the sides of the unit. The switch can also be
mounted to the wall using the same included rack mounts. See images below.
