5
cord firmly into the receptacle of the switch and the other
end into an electric service outlet. After the power cord
installation, please check if the power LED is illuminated
for a normal power status.
Installation
This switch can be placed on your desktop directly, or
mounted in a rack. The installation is a snap. Users can
display all the features of the switch by simply attaching
the cables and turning the power on.
Desktop Installation
1. Attach the provided rubber feet to the bottom of the
switch to keep the switch from slipping. The
recommend position has been square-marked.
2. Install the switch on a level surface that can support
the weight of the unit and the relevant components.
3. Plug the switch with the female end of the provided
power cord and plug the male end to the power outlet.
Rack-mount Installation
The switch may standalone, or may be mounted in a
standard 19
” rack. Rack mounting produces an orderly
installation when you have a number of related network
devices. The switch is supplied with two optional rack
mounting brackets and screws, which are used for rack
mounting the unit.
Procedures to Rack-Mount the switch in the rack:
1. First disconnect all the cables from the switch.
2. Place the unit the right way up on a hard, flat surface
with the front facing you.
3. Locate a mounting bracket over the mounting holes
on one side of the unit.
4. Insert the screws and fully tighten with a suitable
screwdriver.
5. Repeat the two previous steps for the other side of the
