WAP-VKIT User Manual
26
You are returned to the Security Profile Table, where your new profile entry appears.
5.5.2
Modify an Existing Security Profile (change the passkey)
Click the red arrow next to the security profile you want to edit.
In the Security Profile Table – Update window, you can change the security mode or the
key (passphrase) in the appropriate sections. Changing settings here is the same as adding
a new profile (see previous section), but it uses an existing profile instead. Changing
settings will affect any ESS profiles that the security profile applies to.
5.5.3
Adding MAC Filtering
The WAP-VKIT is capable of handling MAC filtering for any ESS profile, for either permit or
deny lists. Both lists can be maintained at the same time, but only the permit list or the
deny list can be used at once.
To begin, first add the MAC addresses of the devices that you wish to allow or deny access to.
On the left configuration bar, click Configuration | Security | Mac Filtering. The MAC Filtering
(ACL) Configuration – Update page appears. Click the ACL Allow Access Configuration or ACL
Deny Access Configuration tab, depending on whether you want to only allow or only deny
certain MAC addresses.
