WAP-VKIT User Manual
36
LED Mode
:
You can change the LED Mode to Normal, which
displays the LED lights normally; Blink, which causes
the selected AP’s LED Lights to blink rapidly; or Dark,
which turns off all LEDs except the power light.
(NodeID is unused.)
6. Appendix A
– Specifications
WAP-W5N –Wireless Access Point
APPLICATION SUPPORT AND OVER-THE-AIR QoS
QoS
-
Configurable dynamic QoS rules with Over-the-air resource reservation
-
Automatic, stateful flow detectors for SIP, H.323, Cisco SCCP, SpectraLink SVP, and Vocera
-
User-configurable static and dynamic QoS rules per application (user-defined) and per-user
(stations, users, and port numbers)
-
Call Admissions Control and Call Load Balancing
-
WMM Support
SECU
SECURITY
RITY
Authentication
-
Combination of captive portal, 802.1x, and open authentication
-
Advanced security using WPA2
-
802.1X with EAP-Transport Layer Security (EAP-TLS), Tunneled TLS (EAP-TTLS), Protected EAP
(PEAP) MSCHAPv2, Smartcard/Certificate, Lightweight EAP (LEAP), EAP-FAST, and EAP- MD5,
with mutual authentication and dynamic per-user, per-session unicast and broadcast keys
-
Secure HTTPS with customizable Captive Portal utilizing RADIUS
Encryption support
-
Static and dynamic 40-bit and 128-bit WEP keys, TKIP with MIC, AES
Security Policy
-
Radius assisted, per-user and per-ESSID access control via MAC filtering
-
Multiple ESSID/BSSID each with flexibility of separate and shared security policy
Rogue Detection and Suppression
-
All radios capable of scanning 802.11n, 802.11a and 802.11b/g for rogue devices
MOBILITY
MOBILITY
Zero-loss Handoffs
-
Infrastructure-controlled zero-loss handoff mechanism for standard Wi-Fi clients
CENTRALIZED MANAGEMENT
CENTRALIZED MANAGEMENT
