6
6
Using the hardware controls
Task
Action
Result
Reset to factory defaults
Press and hold power button for
10 seconds.
Outlet LEDs blink during reset,
but outlets remain enabled. User
interface is reset to defaults.
Enter Sleep mode
Press and hold power button for
two seconds.
Outlets turn off, based on user-
defined power off delay times.
Wake from Sleep mode
Press and release power button.
Outlets turn on according to user-
defined power-on delay times.
OLED menu options
Rotate scroll wheel and press
center button
Toggles menu options and selects
an action.
Using the OLED display
From the home screen, rotate the scroll wheel and press the center button to select from the
following menu options:
•
Local Reboot:
Press and hold the center button for two seconds to power cycle the outlets
that have this feature enabled
•
Measurements:
Display the voltage, current or power consumption for the entire PowerPak
or individual outlets
•
Outlet control:
Turn the selected outlet on/off
•
Settings:
Show information about the PowerPak or adjust the display settings
