39
Queue:
Queue ID to configure.
Strict Priority:
Set queue to strict priority type.
WRR:
Set queue to Weight Round Robin type.
Weight:
If the queue type is WRR, set the queue weight for the queue (1-127).
WRR Bandwidth:
Display of the WRR queue bandwidth percentage.
CoS Mapping page
The CoS Mapping table determines the egress queues of the incoming packets based on the 802.1p
priority in their VLAN tags. For incoming untagged packets, the 802.1p priority will be the default
CoS/802.1p priority assigned to the ingress ports.
Use the CoS Mapping table to remark the CoS/802.1p priority for egress traffic from each queue.
CoS Priority
: The CoS Priority level being set
Queue:
Select which Queue the CoS priority should be assigned to
