Pakedge WA-2200-C-1, Quick Start Manual

8

9

8

9

Adding more WA Series APs to the BakPak site

To manage and set up more than one WA-2200, a BakPak site must be created to 

manage them as a group.

To create a BakPak site:

1 

Log in to your BakPak account, then click 

Add Site

 to create a site.

2 

In the 

Management Agent

 list, select the first WA-2200, complete the site 

information, then click 

OK

. 

The site is created, and the WA-2200 will act as the “master AP” for adding more 

WA Series APs to the site.

Adding WA Series APs to the site

To add APs and provision them with the existing configuration:

1 

Make sure that the first AP is already configured, and that the additional APs are 

turned on for at least five minutes and connected to your network.

2 

In BakPak, select the new WA-2200 site, then click 

Device Discovery

.

Any additional WA Series APs are discovered and appear as tiles that can be 

selected (already selected by default).

3 

Click 

OK

. The APs are added to the site.

4 

To apply the first AP’s settings to the new APs, in the BakPak site select the first 

AP you set up (on the previous page), then complete the site information and 

click 

Save & Apply Multiple

 at the bottom. The settings are copied to the APs.