WAP-O3G User Manual
36
3.
Configure the O3G by selecting WDS Bridge Mode from the Properties page under the
System header.
4.
Now configure the Channel and Security settings to match those of the Wireless Access
Point.
5.
Add the MAC address of the Wireless Access Point to the O3G’s WDS Link list on the WDS
page under the Wireless header.
6.
Finish the configuration of the O3G in WDS Bridge Mode by assigning it a unique IP address
if it is not connected to a DHCP server.
7.
You should be able to verify performance from the client device by sending a ping request to
the IP address of the O3G or accessing the GUI through your Web Browser at the same
address.
4.3.1.
Wireless
When you set the WAP-O3G to Wireless Bridge Mode, in the
WAP-O3G main menu the
Wireless
section has the following
four options, to be described in detail the sections that
follow:
Network
WDS
WDS Security
Advanced
4.3.1.1.
Network Settings
In the WAP-O3G main menu, click
Network Settings
. The
Network Settings
page
appears where you can configure the wireless mode and channel to be used by the
WAP-O3G.
Wireless Mode
: Choose the setting that corresponds to the type of wireless
clients connected to your network:
B
,
G
, or
B/G-mixed.
If you aren’t sure which
