background image

Pakon Part#125279-C

October 9, 2006

11

Warranty

Pakon, Inc. warrants to the original purchaser that each Pakon product is free from defects in 
workmanship and material for 12 months, from the date of purchase. In the event any Pakon prod-
uct or component of equipment is replaced by Pakon, Inc. under this warranty, such item is cov-
ered by this same warranty for the remainder of the original warranty period, or sixty days from 
the date of installation, whichever is longer. OEM products supplied by Pakon will be covered by 
the remainder of the original equipment manufacturer’s warranty.

Pakon’s obligation during this warranty period is expressly limited to repair, or in its discretion, 
replacement of non-expendable original equipment or components which it finds defective; ser-
vice and labor costs for such repairs or replacement will be covered under this warranty for the 
first 30 days following the date of installation. Upon authorization, Pakon, Inc. shall prepay all 
transportation costs and return the equipment to the party asserting a claim within the first 30 days 
of installation. That party shall also bear all reasonable service and labor charges incident to any 
warranty claim and those service and labor charges beyond the 30 day labor warranty period.

This warranty does not apply to (1) to any expendable parts, (2) to any Pakon product or compo-
nent which as been repaired or altered with parts or by persons not approved in writing by Pakon, 
Inc. provided, however, that such approval is not to be unreasonable withheld, or (3) to any prod-
uct on which this serial number or name has been altered, defaced or removed. This warranty also 
shall not apply to any Pakon product whose unsatisfactory performance or condition is due to:

Use of any expendable parts or consumable products not tested and approved by Pakon, Inc.

Failure to follow the maintenance or safety procedures recommended for Pakon product oper-
ation

Unusual physical or electrical stress

Accident, neglect, misuse, failure of electric power, air conditioning, humidity control, trans-
portation or causes other than ordinary use in the purposes for which the product was 
intended.

The above express limited warranty is in lieu of all other warranties, express or implied, and there 
are no warranties beyond those stated in this document. The implied warranties of merchantability 
and fitness for a particular purpose, and all other warranties, express or implied, or inferable from 
the course, of dealing or usage of trade, are excluded and shall not apply to this product.

The provisions for repair or replacement of defective parts provided in this warranty shall be the 
exclusive and sole remedy of the purchaser. Pakon, Inc. shall not be liable for any other damages 
(Whether in tort, due to negligence or otherwise) including but not limited to loss or labor, time, 
materials, customer profits, goodwill, or any other indirect, special, incidental, or consequential 
damages in connection with the furnishing operation or faulty performance of this product. This 
exclusive remedy shall not be deemed to have failed of its essential purpose so long as Pakon is 
willing and able to repair or replace defective parts in the prescribed manner.

Summary of Contents for F-135
















Reviews: