Pakon Part#124603-F
February 24, 2004
3
Installing the F-235
The F-235 is a peripheral device. It must be connected to a computer that meets the required spec-
ifications listed on page 2 of this manual.
1. Clear a space near your computer system to place the F-235 scanner. The USB 2.0 cable must
be able to reach the PC, so it cannot be more than 6 feet (2m) from the computer. There must
also be 4 inches (10cm) clearance above and behind the scanner’s ventilation duct.
2. Connect the power cord to the power supply plug on the back of the scanner.
3. Connect the USB 2.0 cable to the back of the scanner.
4. Connect the USB 2.0 cable to the back of the computer, in a USB 2.0 port.
Do not plug in to
a USB 1.0 connector!