Page 11
Ke
ypad M
enu
© JVA Technologies Pty. Ltd. www.jva-fence.com
JVA Touch Keypad Manual
Installer PIN, or when this function is no longer needed.
5.8
PROGRAM DEVICE
5.8.1
Detection
The Keypad will determine if the connected devices are compatible with
Menu Driven Programming. If one device in the group is not compatible,
the system cannot proceed to Menu Programming. It will however put
the devices into programming mode and you can enter the required key-
sequences to change the settings. Please refer to your Energizer/Monitor
user manuals for more information.
5.8.2
Device Selection Menu
Device Selection Screen
Use the Up and Down arrows on the keypad to select the device you want
to program. Once highlighted, press the # key. To exit programming press
the Menu key.
5.8.3
Device Programming
The Keypad will display the current settings. The flashing block on the right
indicates the programming option to be changed.
Device Programming Options Screen
Use the Up and Down arrows on the keypad to change between the pro
-
gramming options. Use the Left and Right arrows on the keypad to change
the value of the selected option.