23
51-4180
OPERATION
WARNING! Never raise the sweeper more than a few feet off the ground.
The sweeper can tip back or the prime mover can tip over causing death or
serious injury.
NOTICE!
Do not store the sweeper with weight on the brush. Weight will deform the
bristles, destroying the sweeping effectiveness. Place the sweeper on blocks or use
storage stands.
NOTICE!
Do not store polypropylene brushes in direct sunlight. The material can
deteriorate and crumble before the bristles are worn out. Keep polypropylene brush
material away from intense heat or flame.
STORAGE
•
Clean the unit thoroughly, removing all snow, dirt and grease.
•
Inspect for visible signs of wear, breakage or damage. Order any parts required and
make the necessary repairs to avoid delays upon removal from storage.
•
Tighten loose nuts, capscrews and hydraulic connections.
•
Coat exposed portions of the cylinder rods with grease.
•
Lubricate grease fittings.
•
Seal hydraulic system from contaminants and secure all hydraulic hoses off the ground
to help prevent damage.
•
Store unit in a dry and protected place. Leaving the unit outside will materially shorten
its life.
Additional Precautions for Long Term Storage:
•
Touch up all unpainted surfaces with paint to avoid rust.
REMOVAL FROM STORAGE
•
Remove cover.
•
Wash unit and replace any damage and/or missing parts.
•
Lubricate grease fittings.
•
Check hydraulic hoses for damage and replace as necessary.
