Palax KS50s
Translation
1-2012
9
Prevent risks, such as slipping in winter, by organising the work sit–e in a
due manner.
Only operate the machine in an adequately lit space.
It is recommended that a suitable stand be purchased or made that enables
the trees to be processed where the logs are ready at the level of the in-feed
deck. Hence, unnecessary lifting may be avoided and the work can proceed
much faster.
The suitable temperature range for operation is approximately -20 to +30
degrees Centigrade. When starting the machine in severe frost, first allow it
to idle at low speed for about 5 to 10 minutes. This way, the oil warms up
and flows better, so risk of damage to the seals is reduced.
No restrictions concerning the weather apply.
Make sure that no other people, especially children, are present inside the
operating range.
Never use the machine indoors, risk of dust generation!
1.13 Terms of warranty
The warranty period runs for 12 months from the date of purchase.
The warranty covers
Parts, damaged during normal operation of the machine due to defects in
material or workmanship.
The reasonable repair cost in accordance with the agreement between
the seller and the manufacturer or the buyer and the manufacturer.
A new part delivered as a replacement for the defective one.
The warranty does not cover
Defects due to normal wear, faulty operation or negligent maintenance.
The saw-bar, the saw-chain, the sprocket, the conveyor belts or oils.
Defects in the machine due to any modifications which the buyer has
made or ordered from a third party and which have affected the machine
in such a way that it can no longer be considered to correspond to its
original configuration.
Other possible expenses or financial demands due to the above-
mentioned measures.
Any indirect costs and/or travel expenses incurred from making repairs
under the guarantee.
The warranty for parts changed during the warranty period, expires at the
same time as the warranty period of the machine.
Consult your dealer about matters related to the warranty.
2 TAKING DELIVERY AND ASSEMBLY OF THE
MACHINE
2.1 State of delivery and acceptance control
❒
The machine is delivered almost ready-assembled, adjusted and test driven.
