1.3. Purpose of use
The Roller and its conveyor are accessories for Palax firewood processors. Using the
machine for other purposes or attaching it to other machines is prohibited.
1.4. Warning symbols
Forklift lifting point
The conveyor’s danger zone extends 5
meters from the conveyor
Disconnect
the
machine
from
its
power source before
conducting
maintenance
1.5. Safety instructions
General provisions and restrictions
The machine is intended solely for cleaning firewood fed from an attached Palax
firewood processor or loaded by a loader.
The firewood cleaner and conveyor’s danger zone extends 5 meters from the sides and
away from the conveyor.
Do not remove any safety devices from the machine.
Operator
Every machine operator must read the entire manual thoroughly.
Always use eye protection and hearing protection.
Always use safety footwear.
Always use work gloves.
Do not wear loose or hanging clothing.
Before use
Set up the Roller and the conveyor in the operating position before turning on the
machine.
Ensure that no unauthorised persons are in the working area.
Operate the machine on a sufficiently solid and even surface.
Operate the machine only in adequate lighting.
Always check that all the guards and covers are undamaged and attached.
Always check the condition of the power cables.
Always check that the hydraulic hoses and components are undamaged.
Ensure that the machine is standing firmly in place before starting operation.
During operation
Keep the working area clear of unnecessary items.
Always stop the machine and disconnect the supply cable before conducting